In the baby product industry, safety shouldn’t be treated as a feature. It should guide your brand from day one.
Parents are informed, cautious, and quick to research the materials behind any bottle, pacifier, or teether they bring into their home. They look for BPA free, non toxic, and Made in USA because they associate those choices with reliability and transparency. One quality issue or one safety recall is enough to damage a brand that took years to build.
This guide walks you through the essentials of manufacturing safe, compliant baby products in the USA. It covers material selection, regulatory considerations, design guidance, and the production environment needed to create high quality silicone parts for infants and young children.
There’s a reason why soft goods like onesies and bibs are often made overseas, while high end "hard goods" are increasingly coming back to the United States. It all comes down to risk mitigation.
When you manufacture in the USA, you are paying for a chain of custody. You know exactly what is going into your silicone mixture. In some overseas markets, "material swapping" (where a factory substitutes a high-grade polymer for a cheaper, filler-heavy one without telling you) is a known risk. This is not a chance most baby brands can afford.
Recent supply chain disruptions have also changed the way brands operate. Working with a U.S. partner allows you to produce smaller, more frequent runs, reducing inventory overhead and giving you the flexibility to meet demand — without waiting months for a container to clear customs.
For modern, premium baby products, Liquid Silicone Rubber (LSR) has largely replaced latex and standard thermoplastics. But not all silicone is created equal. You need to know the difference between Peroxide-Cured and Platinum-Cured silicone.
Peroxide-cured silicone is cheaper. It’s common in industrial gaskets and lower-end kitchenware. The problem is that the curing process can leave behind chemical byproducts and a faint chemical odor.
Platinum-cured silicone is the preferred choice for infant products. It uses a platinum catalyst, which means the process leaves no byproducts, no taste, and no odor. It’s hypoallergenic and does not support bacterial growth. Platinum cured LSR can handle boiling, steaming, and dishwashing without degrading. It’s the safest option for products that go into a baby’s mouth or are handled daily.
Regulatory requirements can feel overwhelming, but with the right manufacturing partner they’re manageable. Here’s what matters most:
This regulation applies to rubber articles intended for repeated use. Any bottle nipple, sippy cup valve, or infant-related product must meet this standard. Your manufacturer should provide material certifications before production begins.
This requires rigorous third-party testing for lead and phthalates. You can’t just "say" your product is safe. You have to prove it with a Children's Product Certificate (CPC) based on passing test results from a CPSC-accepted laboratory.
Even if you aren't making a toy, products like pacifiers, rattles, and teethers often fall under specific sections of ASTM F963. Key tests include:
This is a strict requirement that often catches many people off guard. Every single baby product (and its packaging) must have a permanent tracking label. It needs to show:
This is done so that if a specific batch of material is found to be defective, you can issue a surgical recall for just that batch, rather than destroying your entire inventory and reputation.
You might have a beautiful 3D render of your product, but can it actually be molded?
Silicone behaves differently than plastic — it flows more easily when hot and can fill thin areas, but it can also flash if tooling isn’t perfect. Good DFM catches issues early and protects you from costly redesigns.
LSR can handle thin sections, but consistency is key. Uneven wall thickness increases curing time, which increases cost.
One of the benefits of silicone is its flexibility. In plastic molding, an "undercut" (a lip or overhang) often requires expensive, complex mold actions. With silicone, we can often stretch the part to pop it off the mold. This allows for complex shapes, like the bulb of a pacifier, that would be impossible with rigid plastic.
Smooth silicone parts can release from a mold with very little draft. Textured surfaces require more draft so the texture does not drag during ejection.
Silicone cannot be accurately replicated with standard 3D printing materials, so brands typically use:
Several factors influence the cost of bringing a baby product to market.
Your manufacturing partner should help you model different scenarios to find the best long-term strategy.
Baby products cannot be produced in a general manufacturing environment. They require clean, controlled spaces that prevent contamination.
We operate white room environments that maintain strict cleanliness and air quality. Assembly and packaging can also take place within these controlled areas. This keeps the product protected from the moment it leaves the mold until it is sealed in its final packaging.
We’ve been the manufacturing partner of a number of leading baby brands such as Baby Banana Brush, The Brushies and Mason Bottle. These are products designed for infants where material purity and consistency are essential. The same level of precision and attention is applied to every consumer baby product we manufacture.
Choosing a manufacturing partner is choosing a partner for your brand. As a trusted US manufacturer, we bring clarity, communication, and material traceability to every stage of production.
Contact us today to discuss your design and how we can help you bring your product to market with confidence.